Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Dry the cleaned surfaces with a cloth.
1. Clean the shelves, the other removable parts and the interior of the appliance
with warm water and a mild, non- acidic detergent.
2. Use clear water to rinse.
3. Dry the cleaned surfaces with a cloth.
4. Check the water drain and clean it if needed.
Clean with warm water and a mild, non- acidic detergent.
Do not use any abrasive detergents! Do not use any organic
Do not use any steam cleaners to clean or defrost the appliance. The steam can get
into contact with the electrical parts and cause an electrical short.
1. The cooling compartment is defrosted automatically. The water runs into a
container near the compressor.
2. If the automatic defrosting does not meet the requirements, e.g. on days
with high ambient temperatures and humidity, defrost the appliance
manually as described above.
3. In order to do this switch off the appliance by turning the thermostat to
position 0/AUS/OFF and disconnect it from the mains.
Never use mechanic devices, knives or other sharp-edged items to remove
WARNING! Switch off the appliance and disconnect it from the mains
1.
before you clean or maintain it.
2. Unscrew the illuminant-cover (1) and remove it (→).
3. Turn the illuminant anti-clockwise to remove it.
4. Insert a new illuminant of the same kind and power (220~240V/10W).
5. Reinstall the illuminant-cover.
5
Detergents such as vinegar, citric acid etc
All manuals and user guides at all-guides.com
Internal cleaning
Door seals
5
detergents!
Do not use essential oils!
Defrosting
WARNING!
Risk of electric shock!
NOTICE!
encrusted ice inside the appliance.
Replacing of the illuminant
38
Werbung
