Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USB RECORDING
-------------------------------------------------------------------------------------------
Disconnecting external data media
1
In the »Disk Management« menu select the
line »Safely Remove Disk« with »
« or »
«
V
Λ
and press »OK« to confirm.
Note:
Disk can be safely removed from the socket
7
now.
Selecting external data media
If there are more than one external data media
connected to the television, then select one of
them.
1
In the »Disk Management« menu select
the line »Disk« with »
« or »
« and press
V
Λ
»OK« to confirm.
2
Select the external data media with »
<
« or
>
»
«.
»BACK <
3
Switch back with
« or press
»EXIT« to end the setting.
Selecting a partition on the external
media
If there are more than one partitions on the exter-
nal data media, select one of them.
1
In the »Disk Management« menu select the
line »Partition« with »
« or »
« and press
V
Λ
»OK« to confirm.
2
<
>
Select the desired partition with »
« or »
«.
»BACK <
3
Switch back with
« or press
»EXIT« to end the setting.
Testing external data media
You can test the external data media to see if it is
suitable for the required functions.
1
In the »Disk Management« menu select the
line »Disk« with »
« or »
«. If there are
V
Λ
more then one external data media, select
<
>
the desired data media with
« or »
«.
2
Select the line »Partition« with »
« or »
«.
V
Λ
If there are more then one partitions, select
the desired partition with
<
« or »
>
«.
3
Select the line »Check Disk« with »
« or
V
»
« and press »OK« to confirm
Λ
– Disk information is displayed.
52
ENGLISH
»BACK <
4
Switch back with
« or press
»EXIT« to end the setting.
Formatting the partition
1
In the »Disk Management« menu select the
line »Format Partition« with »
« or »
« and
V
Λ
press »OK« to confirm.
2
To confirm deletion process, press » «
(green);
or
to cancel deletion process, press » « (red)
button.
»BACK <
3
Switch back with
« press »EXIT«
to end the setting.
Switching to continuous recording
When the continuous recording option is set to
on, TV starts recording the current programme to
time shifting memory. Average recording time for
this memory is 60 minutes.
1
Open the menu with »MENU«.
2
Activate the menu item »Settings« with
»OK«.
3
Select the menu item »TV Settings« with »
>
«
<
or »
« and press »OK« to confirm.
– »TV Settings« menu is displayed.
4
Select the line »Advanced Settings« »
« or
V
»
« and press »OK« to confirm.
Λ
5
Select the line »Permanent Timeshift« with
<
>
»
« or »
« and press »
« or »
« to turn to
V
Λ
»On« position.
6
Press »EXIT« to end the setting.
USB OPERATION
--------------------------------------------------------------------------------------------
Connecting external data media
It is advised to put the television on stand-by
mode before connecting the external data me-
dium. Connect the device and then switch the
television on again.
Before disconnecting the data medium, the tele-
vision must first be switched to standby, other-
wise files can be damaged.
Notes:
The socket »USB1« at the side of the tele-
7
vision supports 500 mA current according
to the USB standard. Devices such as exter-
nal hard disk and etc. that consume more
power can only be connected to the
»USB2
(HDD)« interface of the television.
If you are using a power cable for the ex-
7
ternal hard disk that you have connected to
(HDD)« USB interface, then the
the
»USB2
power cable of the external hard disk must
also be unplugged when the TV is turned off.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device is
being read by the TV.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment) de-
vices in EN 55022/EN 55024 is not pos-
sible.
USB transfer is not an operating mode in it-
7
self. It is only an additional function.
58
ENGLISH
1
Connect the
»USB2
(HDD)« USB interface
on the television and the related data output
on the external device (external hard disk,
digital camera, card reader or MP3 player)
with a USB cable;
or
plug the memory stick in one of the »USB1«
sockets at the side of the television.
Removing the external data
media
Before removing the external data medium, log
off the data medium.
1
Open the menu with »MENU«.
2
Select the menu item »Media Player« with
>
<
»
« or »
« and press »OK« to confirm.
3
Select the Option »PVR« with »
<
« or »
>
«
and press »OK« to confirm.
4
Select the »Media Options« with » «
(green).
5
Select the line »Disk Management« with
»
« or »
« and press »OK« to confirm.
V
Λ
6
Select the line »Safely Remove Disk« with
»
« or »
« and press »OK« to confirm.
V
Λ
7
Remove the data medium from the socket.
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
