Grundig 40 VLE 5430 BP Servicehandbuch Seite 78

WIRELESS SCREEN SHARE (LIVESHARE)
What is LIVESHARE?
Liveshare is a wireless technology featured
7
with Android operating system and used to
reflect the screen of your mobile device which
supports this feature to your television support-
ing Liveshare. By using this technology you
can share your device's content, present a
slide show or play your favorite game on a
larger screen.
Screen share with Liveshare con-
nection
1 Connect Grundig WiFi USB dongle to the
»USB1« or »USB2(HDD)« socket of your
television in order to connect the television
to a wireless network.
2 Open the menu with »MENU«.
3 Select the menu item »Screen Share« with
» > « or » < « and press »OK« to confirm.
– »Liveshare« menu is displayed.
4
Start Liveshare application from your laptop
PC or mobile device and select your televi-
sion.
– Liveshare will begin in a short while and
the screen image of your laptop PC or
mobile device will be reflected on the
television.
5
Press »EXIT« to end Liveshare.
---------------------------
Note:
To find out if your laptop PC or mobile device
7
supports Liveshare feature or not, please visit
the Website of the manufacturer.
ENGLISH 79
PC MONITOR MODE
----------------------------------------------------------------------------------
Connecting a PC
1
Connect the socket »PC-IN« on the television
to the corresponding socket on the PC using
a VGA cable.
2 Connect the »Audio« socket on the televi-
sion to the corresponding socket on the PC
using a suitable cable.
Note:
Adjust your PC to the monitor (for example,
7
picture resolution 1280 x 768, picture fre-
quency 60 Hz).
Selecting the channel position
for the PC
1 < >
Press » « and use » « or » « to select
input signal »PC«, then confirm with »OK«.
Settings for the PC
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3
Select the menu item »Source Setup« with
» > « or » < « and press »OK« to confirm.
– »Source Setup« menu is displayed.
80 ENGLISH
Sound Settings Parental Guidance
Source Setup
Auto Adjust
Auto Adjust Mode Off
Position 0H-0V
Size 0
Phase 0
Change Area Back Exit
4 Select the function and setting you want
< >
using » « or » « and set with » « or » «.
V Λ
Options:
– »Auto Adjust«, for automatic PC configura-
tion;
– »Auto Adjust Mode«, when set to »On«,
automatically makes adjustments in PC
mode;
– »Position«, adjusts the picture position
horizontally and vertically;
– »Size«, sets the cycle frequency;
– »Phase«, removes horizontal flicker, blur-
ring and horizontal lines.
5 Press »EXIT« to end the setting.