Connecting External Data Media - Grundig 22 VLE 2100 DVD Bedienungsanleitung

USB OPERATION
Connecting external
data media
Before connecting the data medium, switch the
television to standby using
nect the device and then switch the television on
again.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
Notes:
If you use a network cable for external hard
7
disks which are connected to the
socket on the television, this network cable
must also be disconnected from the power
supply when the television is switched off.
External data media may not be disconnect-
7
ed from the television set while files on the
data medium are being accessed.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
USB transfer is not in itself an operating
7
mode. It is only an additional function.
---------------------------------------------------------------------------------------------------------------
» «
POWER
. Con-
» «
USB
»
1 Connect the USB
and the corresponding socket on the data
device (external hard drive, digital camera,
card reader or MP3 player) using a USB ca-
ble;
2
Confirm the display
(green).
– The file browser appears.
«
socket of the television
» « » «
with
ENGLISH
35