Grundig 40 VLE 5430 BP Servicehandbuch Seite 76

INTERACTIVE PORTAL (HBBTV)
What is HbbTV?
HbbTV provides next generation interactive tele-
text broadcast with its modern structure, content
and high definition (HD) image and videos.
To receive HbbTV broadcast, your television
must be connected to the Internet.
Das Erste Heute
03.03 Di 04.03 Gestern
Heute 14:00 - 14:10 Heute 14:10 - 15:00 Heute 15:00 - 15:10
Das Erste Das Erste Das Erste
Tagesschau Rote Rosen (1677) Tagesschau
MEIN TV TIPPS TV START
Radio
TV 0 Startleiste
Using HbbTV
When you switch to a TV program that supports
HbbTV, an info message will appear stating that
HbbTV broadcast is available.
1
Press » « (red) to open HbbTV.
– Information regarding the services will ap-
pear on the screen. Additionally, colored
buttons necessary for browsing the menus
will also appear.
Note:
The range of subjects and selection of indi-
7
vidual subjects depend on the programme
provider.
Numeric buttons »1« through »0« are used
7
for additional functions.
2
Press » « (green), » « (yellow) or » «
(blue) to select the desired topic field.
64 ENGLISH
----------------------------------------------------
This service provided by ARD includes "Das Er-
ste1Mediathek" along with teletext restructured
graphically with high definition images. ZDF
service includes "ZDF mediathek" and other pro-
gramme information (as of July 2012).
This feature is only available in countries where
the service is provided.
Do. 15:08
Morgen Sa 08.03 So 09
Heute
Heute 15:10 - 16:00 Heute 16:00 - 16:10
Das Erste Das Erste
Strum der Liebe Tagesschau
(1938)
ALLE SENDER THEMEN SUCHE
Ausblenden Extras Mediathek Videotext
3 Select the option you want with » «, » «,
V Λ
< >
» « or » « in the selected topic field and
confirm with »OK«.
4 Press » « (red) to close HbbTV.
Additional functions for video
indexes
1 Start playback with » 8 «.
2 Pause playback with » ! «.
3 Resume playback with » 8 «.
4
Rewind by » 3 « forward by » 4 «.
5 Stop playback with » «.
7
CONVENIENCE FUNCTIONS
Functions in the "About" menu
1 Open menu with »MENU« button.
2
Activate the menu item »Settings« with
»OK«.
3 Select the menu item »TV Settings« with » > «
<
or » « and press »OK« to confirm.
4 Select the line »About« with » « or » «
V Λ
and press »OK« to confirm.
Note:
Additional operations are explained in the
7
following sections.
Product information
1 From the »About« menu use » « or » «
V Λ
to select the line »Product Information« and
press »OK« to confirm.
– Software version information of the pro-
duct is displayed.
»BACK <
2 Press « to go back one menu
level or press »EXIT« to end the setting.
Software update (OAD)
(only for digital television channels)
1
From the »About« menu use » « or » «
V Λ
to select the line »Software Updates« and
press »OK« to confirm.
2 Select the option »OAD« with » < « or » > «
and press »OK« to confirm.
– The search for new software is being car-
ried out.
Note:
If no new software is available the menu au-
7
tomatically switches off.
3 If new software is available, press » «
(green) to install the software.
– The new software will be loaded.
Warning:
Television will restart after update. Do not
7
turn your television's power off during up-
dates.
Note:
For automatic checking of software update,
7
,
select from »Source Setup« menu »Ad-
vanced Settings« the line »OAD« with » «
V
or » «. Use » < « or » > « to select »On«.
Λ
68 ENGLISH
------------------------------------------------------------
Software update (Internet)
(only for digital television channels)
1
From the »About« menu use » « or » «
V Λ
to select the line »Software Updates« and
press »OK« to confirm.
2 Select the option »Internet« with » < « or » > «
and press »OK« to confirm.
– The search for new software is being car-
ried out.
Note:
If no new software is available the menu au-
7
tomatically switches off.
3 If new software is available, press » «
(green) to install the software.
– The new software will be loaded.
Warning:
Television will restart after update. Do not
7
turn your television's power off during up-
dates.
Software update (USB)
1 Plug the memory stick in one of the »USB«
sockets at the side of the television.
2 From the »About« menu use » « or » «
V Λ
to select the line »Software Updates« and
press »OK« to confirm.
3 Select the option »USB« with » < « or » > «
and press »OK« to confirm.
– The software on the USB memory stick is
installed.