Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NETWORK SETUP
-------------------------------------------------------------------------------------------
10
Select the required character with »
«,
V
»
«, »
<
« or »
>
« and move to the next
Λ
character with »OK«.
– Using »Shift«
»OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »
« to delete the character
entered and press »OK« to confirm.
11
Confirm the password with » « (green).
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
12
Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
13
Press »EXIT« to end the setting.
Note:
If you do not have a dynamic network, fol-
7
low the instructions in manual connection
section.
38
ENGLISH
Manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Address«, »Netmask«, »Gateway« and
»DNS« values (IPS) from your Internet Service
Provider.
1
Open the menu with »MENU«.
2
Activate the menu item »Settings« with
»OK«.
3
Select the menu item »Network Configura-
tion« with »
>
« or »
<
« and press »OK« to
confirm.
– »Network configuration« menu is dis-
played.
4
Select the line »Change Connection Type«
with »
« or »
« and press »OK« to con-
V
Λ
firm.
5
Select the option »Wireless« with »
<
« or
>
»
« and press »OK« to confirm.
– WiFi warning screen will be displayed.
6
Activate WiFi with » « (green).
7
Select the line »Network Configuration«
with »
« or »
« and select the option
V
Λ
»Manual« with »
<
« or »
>
«.
8
Select the line »Advanced« with »
« or
V
»
« and press »OK« to confirm.
Λ
– »IP Address«, »DNS«, »Netmask« and
»Gateway« options are active.
Timer Settings
TV Settings
Network Configuration
Change Connection Type
Wireless
WiFi
On
Select Access Point
N/A
Network Configuration
Manual
IP Address
000.000.000.000
DNS
000.000.000.000
Change Area
Back
Exit
9
Select the line »IP Address« with »
«.
V
Enter IP address with »1...0«.
10
Select the line »DNS« with »
«.
V
Enter DNS address with »1...0«.
11
Select the line »Netmask« with »
«.
V
Enter Netmask address with »1...0«.
NETWORK SETUP
-------------------------------------------------------------------------------------------
12
Select the line »Gateway« with »
«.
V
Enter Gateway address with »1...0«.
13
Select the line »Select Access Point« with
»
« or »
« and press »OK« to confirm.
Λ
V
– »Select Access Point« menu is displayed
by scanning available wireless networks.
14
Select the network that you want to connect
with »
«, »
«, »
<
« or »
>
« and confirm
V
Λ
with »OK«.
– Wireless connection password screen is
displayed.
Note:
For device to discover the wireless modem
7
on the network, the network name should
support ASCII characters.
15
Select the required character with »
«,
V
»
«, »
<
« or »
>
« and move to the next
Λ
character with »OK«.
– Using »Shift«
»OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »
« to delete the character
entered and press »OK« to confirm.
16
Confirm the password with » « (green).
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
17
Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
18
Press »EXIT« to end the setting.
Change TV Name
To make it possible to identify your TV in the net-
work, the name "Inter@ctive TV" is assigned at
the factory. You can change the name.
1
Open the menu with »MENU«.
2
Activate the menu item »Settings« with
»OK«.
3
Select the menu item »TV Settings« with »
«
V
or »
« and press »OK« to confirm.
Λ
4
Select the line »About« with »
« or »
«
V
Λ
and press »OK« to confirm.
5
Select the line »TV Name« with »
« or »
«
V
Λ
and press »OK« to confirm
6
Delete the current name. To do this, select
<
the »Clear« button with »
«, »
«, »
« or
V
Λ
»
>
« and confirm with »OK«.
7
Select the required character with »
«,
V
»
«, »
<
« or »
>
« and move to the next
Λ
character with »OK«.
– Using »Shift«
»OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »
« to delete the character
entered and press »OK« to confirm.
8
Confirm the new name by pressing » «
(green).
9
Press »EXIT« to end the setting.
ENGLISH
39
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
