Kenwood KX-76R Bedienungsanleitung Seite 5

System control (Except some areas)
KD-75F/KD-65F
KR-V126R
ia
Bllos
i TASES
0010 00 elo Oe C1lOC>
Fig. 2 Jack @ (Synchro for the turntable) :
Connect this connector to the jack @ of the turn-
table KD-75F or KD-65F for synchronized recording.
For details, refer to the Instruction Manual of the
turntable.
Fig. 3 Jack ® (Synchro forthe receiver unit):
Connect this connector to the jack "CASSETTE" of
the receiver KR-V95R (KVR-AQOR) or KR-V75R
(KVR-A7OR) for wireless remote control operation.
For details, refer to the Instruction Manual of the
receiver.
Fig. 5 Jack @ (Synchro for the system components):
Connect to the synchro connector of the audio com-
ponents as shown in the figure.
KX-76R (E)
5