Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Introduction
Your choice
of this product indicates that you are a
devotee to excellence in sound reproduction.
We appreciate your patronage and take pride in the long
tradition of quality components.
So that you can get the most out of your unit, we suggest
that you take the time to read through this manual before
you hook up and operate your system. This will acquaint
you with operating features, and system-connection con-
siderations, so that your listening pleasure will be en-
hanced right from the start. You will notice that in all
aspects of planning, engineering, styling, operating con-
venience and adaptability, we have sought to anticipate
your needs and desires.
Keep this manual handy for future reference.
For Your Records
Record the serial number, found on the back of the unit,
in the spaces designated on the warranty card, and in
the space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for infor-
mation or service on this product.
Model__.
Serial Number
Installation Notes
@ Install the unit on a flat, vibration-free rigid table.
@ Do not place the unit near a heat producing equip-
ment such as a radiator. Avoid direct sunlight.
@ The unit may not function properly if used at extreme-
ly low, or freezing temperatures. The ideal ambient
temperature is above +5°C (41°F).
@ Do not store or use the unit in a dusty location or ina
moist atmosphere. Select a location where air is well
ventilated.
@ Keep the unit away from a source of magnetic fields
such as TV sets, speaker systems, radios, motorized
toys or magnetized objects.
@ Operate
the
unit on
rated
power
supply
voltage
(45%). Irregular power voltage will result in incorrect
operation.
NOISE REDUCTION SYSTEM MANUFACTURED UNDER
LICENSE
FROM
DOLBY
LABORATORIES
LICENSING
CORPORATION.
"DOLBY" AND THE DOUBLE-D
SYM-
BOL ARE TRADEMARKS
OF DOLBY
LABORATORIES
LICENSING CORPORATION.
Unpacking
Unpack the unit carefully and make sure that all acces-
sories and cables are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage.
lf your unit is damaged or fails to operate, notify your
dealer immediately. If your unit was shipped to you di-
rectly, notify the shipping company without delay. Only
the consignee (the person or company receiving the unit)
can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and
packing materials for use should you transport or ship
the unit in the future.
Note:
$
_
__—_—_———
This unit operates on 220 volts AC only.
WARNING
TO PREVENT
FIRE OR ELECTRIC
SHOCK,
DO
NOT
EXPOSE
THIS APPLIANCE
TO RAIN
OR
MOISTURE.
KX-76R (E)
3
Werbung
