Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Check the brakes before each ride to see if they are working properly. If the brakes are not working properly, check the brakes and
increase brake performance by adjusting the cables or replacing the brake pads.
1. Proper clothing is required. This product is an all - wheel scooter that can be driven with extremely high speed. To prepare for any
emergencies that may arise while driving, each driver should always wear protective equipment. For example, a certified safety
helmet, knee pads, elbow pads, and gloves.
2. Beginners and all riders who can not stand up safely on the scooter should not use turbo mode and dual mode.
Driving this product in turbo mode and dual mode can increase the risk of injury. To prevent this, beginners and all riders using this
product for the first time should use slow mode (ECO) and only one motor. Beginners are not allowed to go downhill in turbo or dual
mode. * Pregnant women should avoid driving this product.
3. Avoid excessive speeds when going downhill. Reduce the driving speed significantly on descents. The descent at high speed is
extremely dangerous as the braking distance increases and the driving stability decreases the brakes well and prevent
abrupt braking. To avoid overheating, do not overuse the brakes when going downhill.
4. The engine and the brakes can bevome very hot while driving. Watch out for burns that could be caused by touchings.
5. Check all screw connections before starting to drive. Uninterrupted vibration and extremely high engine power can cause parts
to loosen, causing you to lose them in sequence and sustain serious injuries that could even lead to death. If you find a screw or nut
connection problem before driving, don´t start to drive. Try to repair or visit the Authorized Service Center immediately.
Before commissioning
E
Werbung
