SXT-Scooters ultimate pro Benutzerhandbuch Seite 29

Setting the sensitivity of the alarm system
First press the "Deactivate alarm" button.
Press and hold the "Search vehicle" / "Horn symbol" button for 2 seconds.
The speaker will display the sensitivity with a sequence of beeps.
1x beep / 2x beep / 3x beep etc.
1x beep is the lowest level, 5x beep is the highest level.
When the desired sensitivity is reached, press any key to select the desired sensitivity
to leave the menu.
In the delivery state, the sensitivity is set to level 2, which is the level at which the
factory setting.
Flash symbol: no function, the scooter is started via the on-board computer.
Horn symbol: Service to find the scooter. Hold the button for 3 seconds to activate the search function, press it again to stop it.
The sensitivity setting of the SXT Ultimate Lite model is not adjustable!
The operation of the alarm system by switching on and off and the search function
works the same way.
Alarm system activation/remote control
Activate alarm system
Deactivate alarm
No function
Search function of
the scooter
E