SXT-Scooters ultimate pro Benutzerhandbuch Seite 28

E
In the course of operation or after renewing the bearing rings in the steering
head, the game of the steering head bearing must be readjusted or readjusted.
The following steps are necessary for this:
1. Release the clamp of the handlebar (Picture 1)
2. Push up the handlebar together with the clamp (Picture 2)
3. Lifting the cap and appropriate tightening the adjusting nuts of the steering
head bearing so that this is free but still free to move. (Picture 3)
4. The handlebar must then be reassembled in reverse order and before
tightening the clamp, the handlebar must be vertically aligned at 90 ° to the
ground. (Picture 4 and 5)
Scooter model may differ!
Adjusting the steering head bearing