Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E
FAQ
One or both engines rotate in reverse
If the controllers are out of power for a long time, such as during storage or for example, when hibernating with remote fuses,
they may lose the stored direction of rotation. To correct this, the yellow "teach-in cable" on the control unit must be connected
& disconnected until the direction of rotation is correct. If this is correct, disconnect the cables after 10 seconds and the correct
direction of rotation is saved again.
The braking effect on my vehicle has decreased a lot, what can I do?
Brake pads wear off during use. All disc brakes always have an inner and outer brake pad. The inner (towards the wheel) is
always fixed, while the outer one can move back and forth. After a certain time, the inner lining must therefore be readjusted and
adjusted slightly to the brake disc back to ensure a uniform & safe braking. For this purpose, adjust the large adjusting screw on
the inner side of the brake caliper accordingly.
It may also be that the brake pads have reached their wear / tear limit and must be replaced with new ones.
I can not get the tire off the rim / changed
The rims can be divided into two parts. Please remove the necessary screws and remove one part to the left and the other to the
right to change the tire quickly and easily.
Werbung
