HBK HBM CFT+ Montageanleitung Seite 10

4 GENERAL APPLICATION INSTRUCTIONS
Force transducers are suitable for measuring compressive forces. They provide highly
accurate static and dynamic force measurements and must therefore be handled very
carefully. Particular care must be taken when transporting and installing the devices.
Dropping or knocking the transducer may cause permanent damage.
The permissible limits for mechanical, thermal and electrical stress are listed in section9
"Specifications", page 19. It is essential to take these limits into account when planning
the measuring set-up, during installation and, ultimately, during operation.
CFT+
8
GENERAL APPLICATION INSTRUCTIONS