Register - LGB 21272 Bedienungsanleitung

Register

Assignment
CV 1 Address
CV 2 Starting voltage
CV 3 Acceleration delay
CV 4 Braking delay
CV 5 Max. voltage
After entry of CV 6 (when programming with older 55015 units) function value in
CV 5
the register to be programmed
CV 6 CV number of the register to be programmed
Hand-off function and "Back-EMF"
0 = hand-off function off, Back-EMF off
Bit 1 = hand-off function on, Back-EMF off
Bit 2 = hand-off function off, Back-EMF on
CV 54
Bit 3 = hand-off function on, Back-EMF on
Hand-off function on: When operating with 55015, you can adjust direction and
speed for two seconds after selecting a moving loco without causing the loco
to stop.
Bit 4 = load-dependent chuffs
CV 55 Reset
Range Default
00 - 22 3
0 - 255 2
1 - 255 3
1 - 255 3
1 - 255 160
10
55
11