Fifine AMPLIGAME A8 PLUS Benutzerhandbuch Seite 9

Hexagonal hole
5. Once the installation is complete, you can proceed
to use the microphone by referring to steps 1-3 of the
"Quick Start" guide provided above.
4. Connect the microphone to the arm stand: Insert
the screw into the hexagonal hole located on the
side of the joint. Press the screw firmly with your
finger. Next, screw the thumbscrew into the
opposite side of the joint while keeping your finger
pressed against the screw. Continue tightening the
thumbscrew until the microphone is securely
connected to the arm stand.
9