Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Arm Stand Installation
To utilize the microphone with an arm stand (not provided), please adhere to the
following steps for installation:
1. Disassemble the pivot mount: Carefully unscrew the
thumbscrew to separate it from the screw and pivot
mount. Take care not to misplace these components
during the disassembly process.
3.Install the microphone on the arm stand: Screw
the pivot mount into the arm stand (not
included). Then, insert the microphone into the
pivot mount joint. Ensure you hold the
microphone securely with your hand during this
process.
2. Detach the microphone from the base stand: Hold
the microphone with your hand and unscrew the
thumbscrew to separate it from the screw at the
stand joint. Remember to keep all the disassembled
parts in a safe place.
Keep the black
gearing inside
Keep the black gearing inside
8
Werbung
