Fifine AMPLIGAME A8 PLUS Benutzerhandbuch Seite 14

Microphone Connection Via 3.5 mm Jack
If you wish to monitor your voice in real-time, you can connect your headphones to the
3.5mm jack located at the bottom of the microphone. To hear both the monitoring
sound and system audio through your headphones, set the "fifine Microphone" as the
default output device in your system sound settings. This will route the system's sound
output to the headphone jack along with the monitoring sound.
Tips:
Ensure that you firmly connect your headphones to the designated headphones jack
•
on the microphone.
When the microphone is powered on (indicated by a green mute button) and the
•
microphone gain is not set to zero, you will immediately hear your voice. There is no
requirement to launch any recording software on Apple-Macintosh systems or click
"Listen to this device" on Windows systems.
Do not check this box
14