INVENTOR PR-ION-20L Bedienungsanleitung Seite 27

Understanding Error and Protection codes
Error Codes:
AS- Humidity sensor error-- Power off unit and temporarily unplug allowing device to reset. If
error persists, call for service.
ES- Temperature sensor error-- Power off unit and temporarily unplug allowing device to reset.
If error persists, call for service.
E3 - Unit malfunction-- Power off unit and temporarily unplug allowing device to reset. If error
persists, call for service.
EC- Refrigerant leakage detection— Unit auto detects refrigerant leakage, if this occurs the EC
code will appear. Power off unit and temporarily unplug allowing device to reset. If error persists,
call for service.
Protection Code:
P1 - Unit is defrosting-- Allow the unit time to automatically defrost. The protection will clear
after the unit self defrosts.
P2 - The water tank is full or is not in the right position. Empty the water tank and replace it in
the right position.
In the event of any of the above-mentioned malfunctions, turn off
the unit, and check for any obstructions. Restart the unit, if the
malfunction persists, turn off the unit and unplug. Contact the
manufacturer or a qualified technician for service.
EN
27