Akrapovic Slip-On High Einbauanleitung Seite 9

2. Assemble the clamp from Akrapovič installation kit onto the muffler's inlet, as shown (F 07).
3. Attach the muffler's bracket from Akrapovič installation kit to the sub-frame, using three bolts and one washer from
Akrapovič installation kit (F 08).
IMPORTANT: be careful not to injure yourself or damage any part of the motorcycle during this procedure!
9 / 16
9.8Nm
3 x
7 ftlb
WASHER
F 07
F 08