Akrapovic Slip-On High Einbauanleitung Seite 12

www.akrapovic.com
6. Align the clamps as shown and tighten them to the specified torque (F 13).
IMPORTANT: make sure not to damage any part of the exhaust system or motorcycle during this procedure!
7.
In case of using the BMW single seat fast back unit, cut or grind the marked part of the plastic off the fast back, at
the marked line (F 14, 15).
IMPORTANT: be careful not to injure yourself or damage any part of the motorcycle during this procedure!
14Nm
10ftlb
14Nm
10ftlb
F 13
F 14
12 / 16