Makita DTW1001 Betriebsanleitung Seite 9

Impact force/bolt size corresponding chart (reference)
Impact force grade
displayed on panel
Hard
Medium
Soft
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Selecting correct impact socket
Always use the correct size impact socket for bolts and
nuts. An incorrect size impact socket will result in inac-
curate and inconsistent fastening torque and/or damage
to the bolt or nut.
Installing or removing impact socket
Optional accessory
CAUTION:
Make sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
CAUTION:
After inserting the impact socket,
make sure that it is firmly secured. If it comes out,
do not use it.
Tool with the ring spring
For impact socket without O-ring and pin
Only for Model DTW1001 / DTW1002 / DTW1001XV /
DTW1002XV
Align the square of the impact socket with the square
drive and push the impact socket onto the square drive
until it locks into place. Tap it lightly if required.
To remove the impact socket, simply pull it off.
► Fig.8: 1. Impact socket 2. Square drive 3. Ring
spring
DTW1001 / DTW1001XV
Standard High ten-
bolt sile bolt
M20 - M30 M16 - M24
(3/4" - 1-1/4") (5/8" - 1") (3/4" - 1-1/4")
M16 - M24 M12 - M20
(5/8" - 1") (1/2" - 3/4")
M12 - M20 M10 - M16
(1/2" - 3/4") (3/8" - 5/8") (1/2" - 3/4")
DTW1002 / DTW1002XV DTW1004 / DTW1004XV
Standard High ten-
bolt sile bolt
M20 - M30 M16 - M24
(5/8" - 1") (3/4" - 1-1/4")
M16 - M24 M12 - M20
(5/8" - 1") (1/2" - 3/4")
M12 - M20 M10 - M16
(3/8" - 5/8") (1/2" - 5/8")
For impact socket with O-ring and pin
Only for Model DTW1001 / DTW1001XV
Move the O-ring out of the groove in the impact socket
and remove the pin from the impact socket. Fit the
impact socket onto the square drive so that the hole in
the impact socket is aligned with the hole in the square
drive.
Insert the pin through the hole in the impact socket and
square drive. Then return the O-ring to the original posi-
tion in the impact socket groove to retain the pin.
To remove the impact socket, follow the installation
procedures in reverse.
► Fig.9: 1. Impact socket 2. O-ring 3. Pin
Tool with the detent pin
Only for Model DTW1004 / DTW1004XV
Align the hole in the side of the impact socket with the
detent pin on the square drive and push the impact
socket onto the square drive until it locks into place. Tap
it lightly if required.
To remove the impact socket, simply pull it off. If it is
hard to remove, depress the detent pin while pulling the
impact socket.
► Fig.10: 1. Impact socket 2. Hole 3. Square drive
9 ENGLISH
Standard High ten-
bolt sile bolt
M20 - M30 M16 - M24 M20 - M24
(5/8" - 1")
M14 - M20 M10 - M16 M14 - M20
(9/16" - 3/4") (3/8" - 5/8") (9/16" - 3/4")
M12 - M16 M10 - M14 M12 - M16
(3/8" - 9/16") (1/2" - 5/8")
4. Detent pin
DTW800 / DTW800XV
Standard High ten-
bolt sile bolt
M16 - M22
(3/4" - 1") (5/8" - 7/8")
M10 - M16
(3/8" - 5/8")
M10 - M12
(3/8" - 1/2")