HEIDENHAIN MSE 1180 Installationsanleitung Seite 20

4. Specifications
The MSE 1000 is an advanced system for performing production integrated
measurements at high levels of precision and accuracy. The modules described in these
instructions are designed for indoor use only. The MSE 1000 components shall only be
installed as described in these instructions. Mounting, installation and maintenance are to
be performed by qualified personnel only.
3)
Power consumption
Data transfer
Addressing
Operating temperature 0 °C ... 45 °C
Storage temperature
Relative humidity
Altitude
Degree of protection
Overvoltage category
Pollution degree
Mass
3)
Power requirement of the module. Connected encoders must be considered
additionally.
Notice
Refer to the MSE 1000 Product Information (ID 736907-xx) for power
consumption calculation examples.
MSE 1184 MSE 1384
1)
747500-01 747505-01
2)
747500-02 747505-02
3.8 W 3.5 W
Standard Ethernet, IEEE 802.3
Fixed IP address or DHCP
-20 °C ... 70 °C
† 80 %
† 2000 m
1) 2)
IP65 IP40
II, intended to be supplied from the building wiring
2
640 g 440 g
MSE 1388
1) 1)
747506-01
2) 2)
747506-02
5.0 W
680 g
20