Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Error
Error
Possible Cause
Possible Cause
Please clean up the
Side brush entangled
side brush
1. The base station is not connected with the power supply
Please help the
2. The communication window of the base station is
robot charge
blocked or moved
Please put the
robot back on the
The robot is suspended in the air
ground
Please help the
1. The robot is entangled
robot out of trouble
2. The robot is trapped
Please wipe the
The vision sensor is dirty
vision sensor
1. New mop pad does not stick or stick in place
Mop pad replacing
2. The rubber cleaning pad base is dropped or not picked up
failed
3. No mop pad in the clean mop box
Dust collection
1. The top cover does not close
failed
2. The dust bag is not installed properly
1. Water adding and connecting failed
Water adding failed
2. Removable water tank is not in place
3. There is no water in the removable water tank
30
Solution
Solution
Clean up the entanglement from side brush
1. Ensure that the base station is properly connected with the power
supply
2. Wipe the communication window of the base station or move the
base station back to its original location
3. If the above actions do not solve the problem, please manually place
the robot into the base station
Please put the robot back on the ground
1. Please check whether the robot is entangled
2. Put the robot back in an open area
Please wipe the vision sensor and remove the dirt from its surface
1. Remove mop pad and replace with a new one
2. Install the rubber cleaning pad base on the robot and replace with a
new one
3. Add the clean mop pad
1. Close the top cover
2. Reinstall the dust bag properly
1. Try to connect again
2. Install the removable water tank
3. Please add water to the base station removable water tank
EN
Werbung
