NOESIS Florio F10 Pro Bedienungsanleitung Seite 22

CLEANING CLEANING MODES MODES
1. Changing the Cleaning Mode 1. Changing the Cleaning Mode
Short press " " on the base station once to
select the cleaning mode, or select the cleaning
mode in the APP.
2. Mop Pad Replacement 2. Mop Pad Replacement
To change the mop pad in the middle of a cleaning
task, long press " " on the robot, or
short press " " in the APP.
NOTE: After replacing the mop pad, the robot will
continue any unfinished cleaning task.
22
The START BUTTON on the base station and
the light ring of the indicator will flash in white.
It will revert to the previous cleaning mode
if there is no confirmation action within 10
seconds.
3. Spot Cleaning 3. Spot Cleaning
To spot clean a certain area, manually place the
robot in the area to be cleaned and long press "
" on the robot for 2 seconds, or
select a specific area on your map with the "
in the APP.
NOTE: the spot cleaning area is a rectangular space
of 1.6m*1.6m with the robot as the center point.
Short press " " on the base station once or
confirm the pop-up information in the APP to
select the cleaning mode.
4. Start the auto dust colleaction task 4. Start the auto dust colleaction task
Short press the DUST COLLECTION BUTTON "
" in the APP.
"
EN