NOESIS Florio F10 Pro Bedienungsanleitung Seite 25

MAINTENANCE: ROBOT MAINTENANCE: ROBOT
Clean the dust bin Clean the dust bin
NOTE: in normal use, the robot will self-empty the dust bin at the base station. NOTE: in normal use, the robot will self-empty the dust bin at the base station.
Open the cover of robot and remove the dust
bin.
Rinse the dust bin and filter screen with water
(do not use a brush to scrub the filter screen).
EN
Open the cover of dust bin and dump the
debris.
Wipe the dust bin compartment with a dry
cloth.
Remove the filter screen from the dust bin.
1
2
After air drying the dust bin and filter screen,
put it back to the robot.
NOTE: Ensure the dust bin and filter are
completely dry before replacing it in the robot.
25