NOESIS Florio F10 Pro Bedienungsanleitung Seite 19

ROBOT PREPARATION ROBOT PREPARATION
1. 1. Remove protective packaging from the Remove protective packaging from the
robot robot
Remove the protective strips on either side of the
robot.
4. 4. Charge the robot Charge the robot
Gently push the robot into the base station to charge.
NOTE: The robot will provide a voice alert when charging
has started. The side with camera should be facing outside.
EN
2. 2. Turn on the robot Turn on the robot
Open the cover of the robot. Push the ON/OFF
button to the right to turn on the robot.
3. 3. Install mop plate Install mop plate
Install the mop plate onto the robot as shown.
NOTE: The robot will provide a voice alert if the
installation is successful.
19