NOESIS Florio F10 Pro Bedienungsanleitung Seite 21

START CLEANING START CLEANING
1. Start Cleaning 1. Start Cleaning
Short press " " on the base station, or
Short press " " on the robot, or
Short press " " in APP,
and the robot will start cleaning. (In order to have a
better cleaning experience, it is recommended to
use the vacuuming mode for the first use.)
4. Automatically add water 4. Automatically add water
When the water is low in the on-board water
tank, the robot will automatically return to the
base station to refill from the water tank.
EN
2. Map and Planned Cleaning 2. Map and Planned Cleaning
During the first cleaning, the robot will be building
a map of your home.
NOTE: You can access your map in the app.
5. Auto-Empty 5. Auto-Empty
After vacuuming, the robot will return to the
base station and automatically empty itself
into the sealed bag found at the top of the base
station.
3. Automatically replace the mop pad 3. Automatically replace the mop pad
If mopping, the robot will start the automatic
mop pad replacement function when it
completes the default mopping area (the default
2
area is 25 m ) or the current cleaning task.
NOTE: You can customize the mop pad replacement
by area or by room cleaned through the app.
6. Cleaning task completed 6. Cleaning task completed
When cleaning has completed, the robot will return
to the base station to recharge. Before recharging,
it will empty the dust bin, refill the water tank and
replace the dirty mop pad.
NOTE: the robot will automatically return to the base
station to recharge if the power is less than 15%. Once
it is fully recharged, it will return to finish cleaning.
21