NOESIS Florio F10 Pro Bedienungsanleitung Seite 23

MAINTENANCE: BASE STATION MAINTENANCE: BASE STATION
Empty the Dirty Mop Pad Box Empty the Dirty Mop Pad Box
Open the front cover and remove the used
mop pad box from the base station.
1
2
Replace the Sealed Dust Bag Replace the Sealed Dust Bag
When completely full, open the top cover of
the base station and lift the dust bag out.
1
2
EN
Dispose of the dirty mop pads.
NOTE: one side of mop pad is made from
degradable fiber and polyester fiber for the
other side.
Put a new dust bag by aligning it with the
upper slot in the base station.
1
2
Wipe out the dirty mop pad box as needed
and replace it in the base station.
2
1
Wipe the base station Wipe the base station
Wipe the base station and the compartment
with a clean, dry cloth.
NOTE: Use a dry cloth only. Do not use water
to clean the base station.
23