NOESIS Florio F10 Pro Bedienungsanleitung Seite 18

BASE STATION PREPARATION BASE STATION PREPARATION
7. Insert new mop pads 7. Insert new mop pads
1) Slide up the front cover of the base station
2) Pull out the new mop pad box
1
2
8. Fill water 8. Fill water
Open the top cover of base station and take out
the water tank.
18
3) Remove the new mop pads from their packaging.
4) Turn the mop pads with the granular textured
side down (Please notice the instruction label on
mop pads).
5) Align the mop pad holes with the positioning
posts in the new mop pad box, insert mop pads and
remove the support rods.
support rod
Unscrew the lid and fill with water.
NOTE: To add cleaning solution, add 75ml of
solution to the clean water tank.
*It is recommended to use only the NOESIS cleaning
solution with the robot.
6) Place the new mop pad box back into base
station and close the front cover.
2
1
Screw the lid and put the water tank back into
base station.
1
2
EN