Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Control ON/OFF (1), toggle pushbutton;
Press 1 second to switch the machine from stand by to active and back.
WARNING:
THE MACHINE IS CONSTANTLY POWERED WHEN THE POWER CORD IS
PLUGGED IN AND THE MAIN POWER SWITCH IS TURNED TO ON.
Power indicator (2), LED;
The LED will light up when the machine is powered. It flashes when the machine is in stand-
by mode.
Safety indicator (3), LED;
The LED will light up when the beam of the optical safety device at the input side of the nip
is not interrupted.
Pressure indication (4), 4 LED's;
The LED's indicate the pressure setting of the main rollers. When 2 LED's light at the same
time, they indicate the tens in between. See specifications for actual pressure range. All four
LED's flashing indicates a pressure or nip setting error (see section 0).
NIP setting indication (5), Pointer;
This mechanism is directly coupled with the nip control and indicates the distance (nip)
between the main rollers, set by the hand wheel.
Slow mode (6), toggle pushbutton;
Press 1 second to switch slow mode ON or OFF.
To run at the fixed slow mode speed the footswitch must be pressed.
CAUTION:
When slow mode is active the machine can still run at high speed.
Slow mode indication is NOT a speed indication. It is a working method.
Slow mode indicator (7), LED
The LED will light when slow mode is selected.
Stop (8), pushbutton;
Press to stop the rotation of the rolls.
Forward (9), pushbutton;
Press to start the rotation of the rolls in the forward direction.
Forward indicator (10), LED;
The LED will light when the forward mode is selected.
Speed control (11), control knob;
Werbung
