cecotec READYWARM 1550 MAX CERAMIC ROTATE SMART WHITE Bedienungsanleitung Seite 17

ENGLISH
2. Turn the main switch on the back of the appliance to the on position (I). The heater will
beep, and the display will show the temperature.
3. Press the on/off touch icon to switch on the device. The heater will operate in Fan
mode, the display will show .
4. Press the Mode touch icon to select the desired mode: fan mode (
mode ( ) and high-power mode (
5. Press the Timer touch icon to set the auto power off time from 1 to 12 hours.
6. Press the Temperature touch icon to set the temperature between 15-45°C. If the set
temperature is 1°C higher than the room temperature, the heater will start heating in
medium power mode. If the set temperature is 3°C higher than the room temperature, the
heater will start heating in high power mode. Once the room temperature has reached the
set value, the heater will operate in Fan mode.
7. Press the Oscillation touch icon to activate the oscillation function.
8. Switch off the appliance by pressing the On/Off touch icon
in Fan mode for 30 seconds. The Fan mode indicator (
will switch off.
Note: the indicator lights up when the corresponding mode is operating.
4. CLEANING AND MAINTENANCE
1. Before cleaning the heater, make sure that it is unplugged.
2. Use a damp cloth with a little neutral detergent to clean the heater. Do not use other
solvents.
3. The heater must be used or stored after it has completely cooled down and dried out.
4. If you stop using the heater, unplug it from the socket and store it in a dry place.
5. TECHNICAL SPECIFICATIONS
Product reference: 08274 / 08291
Product: ReadyWarm 1550 Max Ceramic Rotate Smart White / ReadyWarm 1550 Max Ceramic
Rotate Smart Black
Rated power: 1500 W
Voltage: 220-240 V
Frequency: 50 - 60 Hz
32
READYWARM 1550 MAX CERAMIC ROTATE SMART WHITE / BLACK
), low power
).
, it may continue to operate
) will flash and then the heater
Name of the model:
08274_ReadyWarm 1550 Max Ceramic Rotate Smart White
08291_ReadyWarm 1550 Max Ceramic Rotate Smart Black
Product Symbol Value Unit
Heating power
Rated heat output P 1.5 kW
nom
Minimum heat
output P 1.0 kW
min
(illustrative)
Heating power
maximum P 1.5 kW
max,c
constant
Auxiliary energy
consumption
At rated heat
el 0.000 kW
output max
At minimum heat
el 0.000 kW
output
min
In standby mode el 0.000 kW
SB
READYWARM 1550 MAX CERAMIC ROTATE SMART WHITE / BLACK
ENGLISH
Product Unit
Type of heat input, for electrical stor-
age.
Local heaters only (select one)
manual control of the heating
load, with integrated thermo- [NO]
stat
manual control of the heat load
with feedback of ambient and/ [NO]
or outdoor temperature
electronic heat load control
with feedback of ambient and/ [NO]
or outdoor temperature
Fan assisted heat output [NO]
Type of heat output/ambient tempera-
ture control (select one)
single-stage heat output and no
[NO]
ambient temperature control
Two or more manual stages, no
[NO]
room temperature control
with mechanical thermostat for
[NO]
room temperature control
with electronic room tempera-
[YES]
ture control
electronic room temperature
[NO]
control and daily timer
electronic room temperature
[NO]
control and weekly timer
33