Kärcher WR 20 Originalbetriebsanleitung Seite 8

Device elements
Illustration on the inside of the front
cover
1 Screw connections
2 Star handle screw
3 Holder for spray bar
4 Chassis and suspension (WR 50)
5 Spray bars
6 Nozzles spray bars
7 Temperature indicator
Flow restrictor
In order to maintain a consistently high tem-
perature (above 90°C) of the water, a pow-
er nozzle must be inserted into the screw
connection of the spray bar to restrict the
flow.
Note
The necessary power nozzle is matched to
the corresponding high-pressure cleaner
and must be ordered separately.
Hot water high-pres-
sure cleaner
HDS 6/14 C
HDS 6/14-4 C
HDS 7/12-4 M
HDS 7/16 C
HDS 8/17 C
HDS 8/18-4 C
HDS 8/18-4 M
HDS 9/18-4 M
HDS 10/20-4 M
HDS 12/18-4 S
HDS 13/20-4 S
HDS 1000 De
HDS 1000 Be
HDS 13/20 DeTr.1
HDS 17/20 DeTr.1
Note: Power nozzles for hot water high-
pressure cleaners not listed here must be
requested from the service partner.
8
Order
number Power
nozzle
2.113-070.0
2.113-070.0
2.113-006.0
2.113-041.0
2.113-071.0
2.113-071.0
2.113-071.0
2.113-005.0
2.113-021.0
2.113-010.0
2.113-025.0
2.113-071.0
2.113-071.0
2.113-071.0
2.113-071.0
EN
Spray bar
Installing the spray bar
 Push power nozzle into the screw con-
nection.
 Insert the sealing ring between the pow-
er nozzle and the spray lance.
 Apply metal glue 6.867-075.0 (provid-
ed) to the thread of the spray lance.
 Screw the spray bars onto the spray
lance.
Note
Observe drying time of the metal glue!
Note
The connection can no longer be loosened
after the metal glue has hardened.
– 2