Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller as well as
wireless
via
QuickDMX
Transmitter/Receiver.
Menu structure
Press the MENU button so many times until the desired function is indicated on the display. Use the ENTER
button to select the function. With the buttons UP and DOWN you can select the mode. Confirm with
ENTER.
Default settings shaded
Mode
DMX mode
Master/Slave mode
Sound control
Automatic mode
Color mixture
Color presets
Display switch-off
Display reverse
Software version
Default
with
the
optionally
Display
Addr
A001-A512
3CH
4CH
11CH
Chnd
21C1
21C2
64CH
d512
Mode
Mast
SId
Id01-Id14
MId
M0-M14
So 0-So20
Soun
Aut0-Au20
Auto
r 0-100-255
G 0-100-255
Manu
b 0-100-255
U 0-100-255
Colo
Co01-Co15
ON
LED
OFF
disp
disp
dsip
Ver
Vxx
Rest
available
EUROLITE
Setting DMX starting address
3-channel mode
4-channel mode
11-channel mode
21-1-channel mode
21-2-channel mode
64-channel mode
DMX mode
Master setting
Number (or numbering) of slave
devices
Total number of connected devices,
incl. master
Sound-controlled programs
Microphone sensitivity
Se0 – Se99
low > high
Automatic show programs
Running speed
SP0 – SP99
slow > fast
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
Constant lighting in one of 15 colors *
Display ON
Display OFF
Display normal
Display reverse 180°
Indicates software version
Reset to factory settings
27/36
QuickDMX
USB
Wireless
Function
00147781, Version 1.0
Werbung
