Victron energy Skylla-IP44 12/60 (1+1) Anleitung Seite 9

3.2. Setup menu
The setup menu can be entered by pressing "SETUP" during three seconds.
Scrolling text
   
   
  
  
  
  
  
  
  
  
  
   
    
   
    
    
  
   
   
  
   
   
   
    
 
  
   
   
  
   
  
 
   
  
  
  
  
  
After entering the setup menu, the user can scroll through the menu with the up/down keys.
With select a menu item is entered and the present value is shown. With the up/down keys the user can scroll through the
available modes or increase/decrease the value.
By pressing select again the value/item is set.
Pressing setup shortly will return to the setup menu.
When setup is completed, exit the menu by pressing "SETUP" again three seconds.
Icons Segments
.-.
.-.-.
.-.-.
.-.-.
.-.-.
,
,
.
.-.-.
.-.-.
.-.-.
.-.-.

.-.-.
.-.-.
.-.-.
.-.-.
.-.-.
.-.
, 

.-.-.
 .-.
,,

.



,
Units Function or parameter
, On/off switch
A Maximum charge current

V System voltage (read-only)
,-
Type Charge algorithm
V Absorption voltage
V Float voltage
V Storage voltage
V Equalization voltage
Automatic equalization
Manual equalization
-
Relay function
V Low battery voltage alarm set
V Low battery voltage alarm clear
V High battery voltage alarm set
V High battery voltage alarm
clear
-
Relay minimum closed time
(minutes)
°C mV Battery temperature
compensation per cell
,
h Bulk time protection
h Absorption time
,
Storage mode
h Maximum float time
h Repeated absorption time
Day Repeated absorption interval
A Low temperature charge
current
Watch function (start-up in
storage if battery voltage >13 V
,
BMS Present
V Power supply voltage
A Input current limit
--
The intensity of the backlight
Backlight automatic turn off
after 60s
--
Text scroll speed
,
Buzzer
-
VE.Can device instance
Software version
System reset to default
settings
History data reset
,
Lock settings
Temperature unit °C/°F
9