Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Precautions
Sony Manufacturing Systems Corporation products are designed in full consideration of
safety. However, improper handling during operation or installation is dangerous and may
lead to fire, electric shock or other accidents resulting in serious injury or death. In addition,
these actions may also worsen machine performance.
Therefore, be sure to observe the following safety precautions in order to prevent these
types of accidents, and to read these "Safety Precautions" before operating, installing, main-
taining, inspecting, repairing or otherwise working on this unit.
Warning Indication Meanings
The following indications are used throughout this manual, and their contents should be
understood before reading the text.
Warning
Failure to observe these precautions may lead to fire, electric shock or other accidents re-
sulting in serious injury or death.
Caution
Failure to observe these precautions may lead to electric shock or other accidents resulting
in injury or damage to surrounding objects.
n
This indicates precautions which should be observed to ensure proper handling of the equip-
ment.
Warning
• Do not use this unit with voltages other than the specified supply voltage as this may
result in fire or electric shock.
• Do not perform installation work with wet hands as this may result in electric shock.
• Do not disassemble or modify the unit as this may result in injury or damage the
internal circuits.
Caution
• Be sure to check the machine and device conditions to ensure work safety before
working on the machine.
• Be sure to cut off the power supply, air and other sources of drive power before
working on the machine. Failure to do so may result in fire or accidents.
• When turning on the power supply, etc. to operate the machine, take care not to
catch your fingers in peripheral machines and devices.
(1)
(E)
Werbung
