Parkside PKZ 1000 A1 Bedienungs- Und Sicherheitshinweise Seite 53

Load hook
The load hook gets deformed when handled unprofessionally or when overloaded. The load hook
must immediately be replaced if the g dimension reaches the limit value of 26 mm. Safety will not be
guaranteed if the above-mentioned provision is not provided.
m Failure to observe the safety is no longer guaranteed.
Service information
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Wear parts*: brake lining set (2 pcs.): 3907405001
* Not necessarily included in the scope of delivery!
11. Storage
Store the device and its accessories in a dark, dry and frost-proof place that is inaccessible to children.
The optimum storage temperature is between 5 and 30˚C.
12. Transport
Transport the device in a suitable container. Pay attention to the security of all chain parts.
G-Neu = 23 mm ±5 %
G-Min. = 22 mm
G-Max. = 24 mm
G-Ersatz nötig = 26 mm
GB/MT 49