Parkside PKZ 1000 A1 Bedienungs- Und Sicherheitshinweise Seite 50

8. Before starting the equipment
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.
m ATTENTION
The device and packaging materials are not toys! Children must not be allowed
to play with plastic bags, film and small parts! There is a risk of swallowing and
suffocation!
Adjustment of the hand chain
1. Before you lift a load with the chain hoist, you should make yourself familiar with the "without
load" function of the chain hoist.
2. Brake control system
Test the brakes as follows:
• Hung the load
• Lift the load
• Lift and lower the load to various heights
• Check whether load holding in any position is ensured
46 GB/MT
The chain hoist is supplied with a hand chain whose length is proportional
to the pass of the pulley. In case of normal installation it satisfies the condi-
tion of proper adjustment of the chain end. In cases in which the length of
hand chain does not appeal the prescribed conditions, it is necessary to
shorten or lengthen the chain.
m Modification of the machine only by a specialist workshop.