Herunterladen Diese Seite drucken

Unify OpenScape CP200 Bedienungsanleitung Seite 2

Vorschau ausblenden Andere Handbücher für OpenScape CP200:

Werbung

OpenScape DeskPhone CP200/CP205/CP600(E)/CP700(E/X)
7
Use four screws to affix the wall mount
to the wall.
Schrauben Sie die Wandhalterung mit
vier Schrauben an die Wand.
10
Push the phone to the wall until the rear
position is reached.
Now push the phone downward until
the lower position is reached.
Schieben Sie das Telefon zur Wand, bis
die hintere Position erreicht ist.
Schieben Sie nun das Telefon nach un-
ten, bis die untere Position erreicht ist.
Availability and technical specifications
are subject to change without notice.
Unify, OpenScape, OpenStage and HiPath are registered
trademarks of Unify Software and Solutions GmbH & Co. KG. All
other company, brand, product and service names are
trademarks or registered trademarks of their respective holders.
Wall mount kit / Wandhalterung
Plug the network cable* into the appro-
priate socket
cable, connect additional cables to the
phone.
Stecken Sie das Netzwerkkabel* in die
entsprechende Buchse
Wenn vorhanden, schließen Sie weitere
Kabel des Telefons an.
Fix the frames of the wall mount on the
left by using the supplied countersunk
screw.
Verschrauben Sie die beiden Rahmen
der Wandhalterung auf der linken Seite
mithilfe der mitgelieferten Senkschrau-
be.
unify.com
8
on the phone. If appli-
am Telefon.
11
Copyright © Unify Software and Solutions GmbH & Co. KG 11/2019
All rights reserved.
Reference No.: A31003-C1010-J100-01-7431
The information provided in this document contains merely general descriptions or
characteristics of performance which in case of actual use do not always apply as described or
which may change as a result of further development of the products. An obligation to provide
the respective characteristics shall only exist if expressly agreed in the terms of contract.
9
Put the phone with the pre-assembled
frame on the wall frame, so that the lat-
eral pins of the phone frame engage in
the guide of the wall frame.
Setzen Sie das Telefon mit vormontier-
tem Rahmen auf den Rahmen an der
Wand, sodass die seitlichen Zapfen des
Telefon-Rahmens in die Führung am
Wand-Rahmen greifen.
12
Plug the handset cable into the socket
on the handset.
Hang up the Handset.
Stecken Sie das Hörerkabel in die Buch-
se am Telefonhörer.
Hängen Sie den Hörer ein.

Werbung

loading