Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety and operating instructions
WARNING
Noise hazard
High noise levels can cause permanent and disabling
hearing loss and other problems such as tinnitus
(ringing, buzzing, whistling or humming in the ears).
To reduce risk and prevent an unnecessary increase
in noise levels:
►
Risk assessment of these hazards and
implementation of appropriate controls is
essential.
Operate and maintain the machine as
►
recommended in these instructions.
►
Select, maintain and replace the insertion tool as
recommended in these instructions.
If the machine has a muffler, check that it is in
►
place and in good working condition.
Always use hearing protection.
►
Use damping material to prevent work pieces
►
from "ringing".
Maintenance, precautions
WARNING
Machine modification
Any machine modification may result in bodily
injuries to yourself or others.
►
Never modify the machine. Modified machines
are not covered by warranty or product liability.
Always use original parts, insertion tools, and
►
accessories.
Change damaged parts immediately.
►
Replace worn components in good time.
►
CAUTION
Replacing the piston
If the circlips are not correctly fitted in the piston
bores, the cylinder cap will be ejected and can hit
the operator, this can lead to personal injury.
After each service or replacement of the piston,
►
always make sure that the circlips have entered
into the grooves properly.
CAUTION
Hot piston
The tip of the piston can become hot and sharp
when used. Touching it can lead to burns and cuts.
Never touch a hot or sharp piston.
►
Wait until the piston has cooled down before
►
carrying out maintenance work.
Storage, precautions
Keep the machine and tools in a safe place, out
♦
of the reach of children and locked up.
10
CP 0006, CP 0006 SVR, CP 0066
9800 0611 90b | Original instructions
Werbung
