cecotec READYWARM 2050 MAX HORIZON BLACK Bedienungsanleitung Seite 37

Function of the symbols
1. Off
2. Cool air
3. Medium power
4. Full power
Temperature knob
Fig. 3.
1. Set the desired temperature level at your discretion.
2. Before switching off, it is best to leave the heater for 5-10 seconds in the cold air function.
Overheating protection
This heater is protected with an overheating protection that automatically switches off the
appliance in case of overheating. For example, when the ventilation grilles are fully or partially
obstructed, the appliance will switch off automatically. In this case, unplug the appliance, wait
about 30 minutes for it to cool down and remove the object blocking the vents. Then turn it
back on as described above. The appliance should now work properly. If the problem persists,
contact Customer Service for assistance.
4. CLEANING AND MAINTENANCE
- Before performing any cleaning or maintenance operations on the appliance, disconnect
it from the mains.
- A soft, damp cloth and neutral detergent are recommended for cleaning. Do not use
abrasive cloths or devices that may affect the appearance of the appliance. Check that the
hot air outlet and ventilation inlet are free of dust and dirt.
- During cleaning, be careful not to touch the heating elements.
- Clean the filter located in the rear part of the device. To open the filter on the back for
cleaning, press the top of plastic net at back.
- In the event of a fault and/or malfunction of the appliance, disconnect it from the mains
and contact an authorised repairer.
5. TECHNICAL SPECIFICATIONS
Product reference: 08255
Product: ReadyWarm 2050 Max Horizon Black
Rated input power: 220-240 V AC, 50/60 Hz, 2000 W
READYWARM 2050 MAX HORIZON BLACK
ENGLISH
37