sylvac D50S Bedienungsanleitung Seite 53

Code Function
'K'
KEY0 or OFF Lock the keyboard (except print)
KEY1 or ON Unlock the keyboard
KEY ? Sends the keyboard status
'L'
LCAL ? Sends the date of the last calibration
LCAL dd.mm.yy Sets the date of the last calibration
LCOR ? Sends the date of the last measuring correction
LCOR dd.mm.yy Sets the date of the last measuring correction
'M'
MM Actives the millimeter unit of the indicated channel
MOD ? Sends the active mode (ABS or REL)
MOD 0 or OFF Lock the function ABS or REL
MOD 1 or ON Unlock the function ABS or REL
'N'
NCAL ? Sends the date of the next calibration
NCAL dd.mm.yy Sets the date of the next calibration
NCOR ? Sends the date of the next measuring correction
NCOR dd.mm.yy Sets the date of the next measuring correction
NUM ? Sends the instrument number
NUM XXXX Modify the instrument number (0...9999)
'O'
OUT 0 or OFF Disables automatic data transmission
OUT 1 or ON Enables automatic data transmission
'P'
PRE or PRESET Actives the memorized preset value.
PRE ? Sends the preset value of the active function (1..4)
PRE+/- Insert the preset value of active channel (1 or 2). Max 400mm/15''
xxx.yyyyyy
PRE OFF Lock the preset function
PRE ON Unlock the preset function
PRI or P Sends the displayed value (1..4)
PRI 0 or OFF Lock the Print function
PRI 1 or ON Unlock the function Print
'R'
REL Actives the relative mode on current channel (1 or 2)
RES1 Actives the resolution (0.0001mm, 0.00001'') on current channel
RES2 Actives the resolution (0.001mm, 0.0001'' ) on current channel
RES3 Actives the resolution (0.01mm, 0.001'') on current channel
RES4 Actives the resolution (0.1mm, 0.01'') on current channel
RES ? Sends the resolution of current channel (1 or 2)
RES 0 or OFF Lock the function Resol
RES ON Unlock the function Resol
RST Reset the unit (customer parameters)
53
E