sylvac D50S Bedienungsanleitung Seite 45

2. Setup on the unit
+
Fct SEt
Loc oFF
Foot 1
Cor1 oFF
Cor2 oFF
Second part of the diagram, see next page
Press the Fct key when switching ON the unit.
(simultaneously)
LOC OFF = Activated keyboard
LOC ON
Function of the external contact
Foot 1 : Print
Foot 2 : Zero setting
Foot 3 : Preset setting
Foot 4 : Change of channel
Foot 5 : Print + change of channel
Foot 6 : Preset then Print
Cor1 on : Enables the measuring correction
Cor1 oFF : Disables the measuring correction
Cor2 on : Enables the measuring correction
Cor2 oFF : Disables the measuring correction
45
= Deactivated keyboard
(point per point) of probe Nb1
(point per point) of probe Nb1
(point per point) of probe Nb2
(point per point) of probe Nb2
E