sylvac D50S Bedienungsanleitung Seite 52

6. Codes for remote commands
Each retro-command must be followed by one (CR) (Carriage Return)
Code Function
? Sends the displayed value (1..4)
'A'
ABS Actives the Abs mode of the indicated channel
'B'
BEEP ? Sends the status of the buzzer
BEEP 0 or OFF Disables the buzzer
BEEP 1 or ON Enables the buzzer
'C'
CHA+ Selects positive measuring direction of the indicated channel.
CHA- Selects negative measuring direction of the indicated channel.
CHA ? Sends the measuring direction of the indicated channel (+/-)
CHA 0 or OFF Lock the function +/-
CHA 1 or ON Unlock the function +/-
COR ? Sends the status of the point per point correction of the indicated
channel
COR PP ? Sends the status of one correction point of the indicated channel
COR RST Reset the measuring correction
COR 0 or OFF Disables the measuring correction
COR 1 or ON Enables the measuring correction (indicated by a point on the last
digit of the display)
COR PP / Insert or modify a point of the correction. PP=Number of points
+/- [0...25]. Max correction : 1.0mm/0.1''
x.yyyyyy
'E'
EXT1 Actives the external contact 1 : Print
EXT2 Actives the external contact 2 : Zero setting
EXT3 Actives the external contact 3 : Preset
EXT4 Actives the external contact 4 : Change of channel
EXT5 Actives the external contact 5 : Print + change of channel
EXT51 Actives the external contact 5 : Print + change to channel 1
EXT52 Actives the external contact 5 : Print + change to channel 2
EXT53 Actives the external contact 5 : Print + change to channels 1 and
2
EXT54 Actives the external contact 5 : Print + change to channels 1 to 4
EXT6 Actives the external contact 6 : Preseet then Print
EXT ? Sends the external contact mode
'F'
FAC RST General Reset (factory parameters) , NUM=263
FCT 1 Actives channel 1
FCT 2 Actives channel 2
FCT 3 Actives channel 1-2 (difference)
FCT 4 Actives channel 1+2 (sum)
FCT? Sends the function used
FCT 0 or OFF Lock the function Fct
FCT ON Unlock the function Fct
'I'
IDE or ID? Sends the instrument identification (SY263)
ID Sends the instrument identification (SYL263)
IN Actives the Inch unit of the indicated channel
52
E