AKO -16523 Schnellstartanleitung Seite 17

Inputs and outputs
Description
In0
Connected probes 1=Probe 1 (Cold room)
I00
Configuration of digital input 1
0= Deactivated
†
I10
3=Severe external alarm
6=Defrost block
Polarity of the digital input 1
I11
0=Activates on closing contact; 1=Activates on opening contact
Configuration of digital input 2
1=Door contac
I20
4=Change of SP
7=Register probe
Polarity of the digital input 2
I21
0=Activates on closing contact; 1=Activates on opening contact
Configuration of relay AUX1 0=Deactivated 1=Compressor/Resistor sump
†
O00
Configuration of relay AUX2 (Not available in AKO-16523/16520)
O10
0=Deactivated
4=Door frame resistance
EP Exit to level 1
HACCP alarm
Description
h1 Maximum temperature of HACCP alarm
KCP
h2
Maximum permitted time for activation of the HACCP alarm (0=Disabled)
EP Exit to level 1
Information (Reading only)
Description
IN{
Option chosen in the configuration wizard
TiD
†
Pd Pump down active?
PU
Programme version
Pr
Programme revision
EP Exit to level 1
* According to wizard.
** Option not available in AKO-16523 / 16520
†
It can only be modified using the configuration wizard (InI).
2=Probe 1 (Cold room) + Probe 2 (Evaporator)
1=Door contact
4=Change of SP
7= Low pressure switch
2=2=External alarm
5=Remote defrost
8=Probe 2° evaporator ** 9=High pressure switch for Hot Gas
2=Light 3=Virtual control
1=Alarm 2=Light
5=Defrost 2° evaporator
0=No 1=Yesi
Values Min.
2=External alarm
5=Remote defrost
0= Deactivated
3=Severe external alarm
6=Defrost block
3=Virtual control
Values Min.
Values Min.
17
1652H311 Ed.02
Def. Max.
1 2 2
*
0 7
0 0 1
0 0 9
0 0 1
*
0 3
0 2 5
Def. Max.
ºC/ºF -50 99 99
H. 0 0 255
Def. Max.