Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CARE AND MAINTENANCE
Note: As with all training machines with mechanical, moving components,
screws may loosen due to frequent use. We therefore recommend that
you check them regularly and, if necessary, retighten them with a suitable
key. Clean your training device regularly with a damp cloth to clean the
surfaces from sweat and dust.
•
Often clean the exercise bike with clean cloth to keep the clean
appearance.
•
The safety level of the equipment only can be maintained if it is regularly
examined for damage and or /wear and tear. It is vital that any faulty
parts are replaced and the it is not used until completed repaired.
•
Regularly check that the elements fastened with nuts and bolts are
correctly tightened.
•
Remember regularly to grease moving parts.
•
Special attention to the component, most of them are susceptible to
wear like brake system, foot pad etc.
•
As sweat is very corrosive, do not allow it to come into contact with the
enameled or chromed parts of the equipment, particularly the computer.
Immediately wipe the equipment after using. The enameled parts can be
cleaned using a damp sponge. All aggressive or corrosive products must
be avoided.
•
Storing the equipment in a clean and dry environment away from
children.
EN
39
Werbung
