Next Level Racing GO KART PLUS Bedienungsanleitung Seite 11

A)
10 A) Align the mounting holes on the Seat Cross Brace with the through holes on the Left and Right Seat
Frames. B) Bolt through and secure with 4 x M8 Bolts, Washers and Flange Nuts.
11
Install 4 x End Caps onto the Left and Right Seat Frames.
12 Pull Seat Slider Handle upwards and slide Seat Slider Assembly forward to access front mounting
holes.
Video Instruction: bit.ly/nlrbuild
B)
11
PARTS:
• • 1 x Seat Cross Brace
• • 4 x M8 40mm Bolts
• • 4 x M8 Ø20mm Washers
• • 4 x M8 Flange Nuts
PARTS:
• • 4 x End Caps
PARTS:
• • NIL