attika RAIS BANDO Installationsanleitung Seite 13

Legend
A Side cover
B Tensioner
C Bracket (L = Left | R = Right)
D Bolt
E Bottom heat compartment plate
F Heat compartment panel rear wall
G Top plate
H Stop
I Rear panel
Installation
1. Unhook rear panel «I».
2. Place the stove in its definitive location. The stove cannot be moved after the
side panel has been fitted because there is a risk of breakage if pressure is
exerted on the side panel.
3. Screw brackets «C» through the front holes (1) to the soapstone/natural
stone side panel «A». Caution: Do not overtighten.
4. Fit side panelling «A». Place the side panels on the bottom of the base and
push against the stop «H». Then press the tensioner «B» at the top.
5. Slide bolt «D» forward.
6. Re-hang rear panel «I».
7. Insert heat compartment plates «E» and «F» and place top plate «G».
Installation manual
13