Parts And Components; Before Use; Operation - cecotec READYWARM 1570 MAX CERAMIC SMART WHITE Bedienungsanleitung

1. PARTS AND COMPONENTS

Fig. 1
1. Power touch icon
2. Boost mode touch icon
3. Timer touch icon
4. Display
5. Temperature touch icon
6. Power setting touch icon
7. LED display brightness touch icon
8. On/off switch
NOTE
The graphics in this manual are schematic representations and may not exactly match the
appliance.

2. BEFORE USE

This device is packaged in a way as to protect it during transport. Take the device out of its
box and remove all packaging materials. You can keep the original box and other packaging
elements in a safe place. This will help you prevent damage to the device when transporting it
in the future. In case the original packaging is disposed of, make sure all packaging materials
are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any piece
missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.
Box content
- Heater
- Instruction manual

3. OPERATION

1. Place the heater on a flat surface and plug it into a mains socket.
2. Press the on/off switch on the back of the heater and turn it to the on position. The heater
will then beep, and the display will show "--".
3. Press the power touch icon to turn the appliance on and off.
- Boost mode: the heater will run for 12 hours continuously. Press the Boost mode
touch icon to activate Boost mode.
READYWARM 1570 MAX CERAMIC SMART WHITE / BLACK
ENGLISH
33