Ignition Switch Lock - KEEWAY V-CRUISE Bedienungsanleitung

4.3. Ignition switch.
The ignition switch lock (Figure 5) is set in front of the steering handle, and the ignition switch must be turned on before
starting the motorcycle. The key position and function are shown in Table 2.
Fig.5
Key position
The circuit is disconnected and the engine
OFF" "
cannot be started
The circuit is closed and the engine can be
ON" "
started
Steering
The circuit is disconnected and the steering
mechanism is locked
lock" "
Function
Table.2
19
Key state
Can be unplugged
Not unplugged
Can be unplugged