Operation Of The Device; Functionalities; Operation Modes; Dhw Control - Airzone Aidoo Pro AZAI6WSPHI4 Kurzanleitung

Operation of the device

FUNCTIONALITIES

Operation modes

The connected Airzone device will simulate the manufacturer's own Modbus device. The
manufacturer's units can operate in both room temperature mode (TH) and in water supply
temperature mode (LWT).
The Aidoo device can regulate the temperature in one or two circuits, both in TH mode and
in LWT mode.

DHW control

The manufacturer's units allow you to manage domestic hot water (DHW) production status
control.
The "Powerful" function can be activated in DHW production status control, which forces the
DHW to reach a temperature that has been preset in the configuration of the unit. If DHW is
turned off, it will not be possible to activate this parameter.

Status modes

The unit status can be selected from the Airzone device, enabling on/off control of the water
supply, of domestic hot water production (DHW) and of the DHW "Powerful" function.
The selectable status mode values are Cooling mode and Heating mode.

Set-point temperature

The unit temperature will depend on the operation mode:
•
In TH mode, the thermostat room temperature will be selected, and in LWT mode, the water
supply temperature at which the unit is to operate will be selected.
•
The DHW temperature can be selected within the ranges set by the unit's own main
thermostat.
The temperature limits cannot be obtained via protocol. The Airzone device will always offer
the default values configured in the unit's thermostat and changing these limits may lead to
the undesirable behavior of the device.
EN
9